I'll try to explain better, the decay1 transition doesn't work well on the Montage pitch envelope, because it's simply ignoring the time parameter I specified. This is not the effect I want for the sound I'm trying to model. I need it to raise the pitch to the maximum value, and stay at that pitch for a good while, before dropping back down to the original pitch. I've attached a picture of the envelope setup and the sound that's coming out as a result (sorry for the poor file quality). You'll notice that I've set decay1 to 127 (the maximum time value), but when I play the sound, it's as if it were 0, because after reaching the maximum pitch peak (+127), it instantly starts to fade back to the original pitch at decay2.It is not clear to me what you are talking about. The pitch envelope is based on time, and all 5 stages respect time. If there is a specific question about the timing of pitch envelope, then I suggest to create a performance from scratch (based on Init Nornal AWM2), reproduce the issue with this performance, and share the performance here.
I observed that decay2 seems to work normally.
Thanks.
Statistics: Posted by Dannyyel — Wed Jul 24, 2024 1:33 am