Yamaha Montage and Montage M Forum • Sending program change from IPAD to Montage M.

Hi all, back again with another question I spend 3 hours trying to figure it out.

I use an IPAD to trigger program changes. This worked very easy on my Roland FA06. I use the Onsong app (it does not really matter which app). As soon I choose a song title it automatically send PC to the Roland. The code I used is: midi: MSB.LSB:PC

Now this won’t work on my Montage M unfortunately no matter which combination I use. Changing : into a dot, using HEX. 66.0.0 should work. Onsong automaticly makes it "66.0:0". Can someone give me a correct code to trigger a slot in a user liveset? It can also be a problem in the Montage settings.

What I did:

Connect Ipad with camera adapter to the USB-to-host input in the Montage.

In Utilities > Settings > Midi i/o

- Change midi i/o to USB
- receive and transmit are ON
- Midi i/o channel is 1

In utilities > Settings > Advances

- Bank select and Pgm Change are ON
- Tried both USB drivers Vendor and Generic (restart)

I downloaded the datalist of the Montage M but I just don’t understand it. It should be a simple MSB.LSB:PC code right?

Statistics: Posted by Oggfish — Thu Jan 30, 2025 10:20 pm

---