Turn Zone Master On. Then use "Part Settings"-->"Zone Settings" to enter the parameters for your external sound, including Transmit Channel (which must match what Mainstage is set to receive on). Tip: for reasons I won't go into here, this will work most smoothly if you choose a channel from 9 to 16. Then, to prevent that part from also triggering an internal sound, on that same screen set "Int SW" to OFF.
That's the short version. For all the detail, see yamahasynth.com/learn/montage-series-synthesizers/zone-master-faq-mastering-montage/
That's the short version. For all the detail, see yamahasynth.com/learn/montage-series-synthesizers/zone-master-faq-mastering-montage/
Statistics: Posted by anotherscott — Wed Jun 12, 2024 2:16 pm