Was careful to reseat the cable but suspect there may be indeed some variation in the RPM due to residue. Wont have a chance to try giving it a good clean before Wednesday. Tried to format a disk- it appeared to work, up to 99% then came up with write protected. Flipped the little tab at bottom of disk, tried again and got the same result!
If the pulley doesn’t come off will isopropyl do any damage to the electronics if there’s a bit of spill?
If the pulley doesn’t come off will isopropyl do any damage to the electronics if there’s a bit of spill?
Statistics: Posted by Cauldblast — Mon Sep 30, 2024 8:35 pm