I understand what you are saying now. Yeah, you definitely need to adjust the 'Level/Vel' to be higher than the default value of +0 for the Element (Wavefrom) under the Element's Amplitude > Level/Pan or else it will have no dynamics in volume.I am a Korean in my 50s. I'm not good at English. I am using Google Translator. I'm not sure if my explanation will be conveyed well. When recording at a single velocity, the velocity ranges from 1 to 127 and operate normally, but the problem is the volume level. Even if you press Velocity 1, it will play at maximum volume. Press the key lightly or hard, but the volume will be played at maximum volume. To solve this problem, you need to adjust it in the montage options. This cannot be done with the sample robot. This problem occurs even if you record at 4 velocity levels. The volume size for steps 1 to 2 is the same, steps 2 to 3 are the same, and steps 3 to 4 are the same. The volume is not reproduced in detail and 127 steps. This is a functional problem with the sample robot. I confirmed this issue with the company that produced the sample robot. I am concerned whether the meaning was conveyed well.
Statistics: Posted by vertig0spin — Sat Apr 27, 2024 9:50 pm