I can confirm that there is no difference between a DG80 and DG100 in the input stage and that neither the gain nor the LEDs are adjustable. At least with firmware V2 both amps behave the same.
I must admit that i am no longer sure whether the test routines were even present in the original firmware V1! It will probably be best to update the firmware first and see if that solves the problem.
If not, the test routines 81 and 82 check the digital processing including gain and sensitivity. There is also a RAM and FLASH-ROM check routine (just in case).
David
I must admit that i am no longer sure whether the test routines were even present in the original firmware V1! It will probably be best to update the firmware first and see if that solves the problem.
If not, the test routines 81 and 82 check the digital processing including gain and sensitivity. There is also a RAM and FLASH-ROM check routine (just in case).
David
Statistics: Posted by david.krause63 — Thu Oct 10, 2024 9:39 pm